Injector Dynamics ID1000CC 14mm For SR20DET S13 S14 240SX Sentra w/ Connector
- Item condition:
- New
- Ended:
- Oct 3, 13:47 PDT
- Price:
- $480.00 View item
- Shipping:
- FREE
- Item location:
- Austin,TX,USA
- Ships to:
- Worldwide
Item specifics
-
- Part Brand:
- Injector Dynamics
-
- Manufacturer Part Number:
- ID1000-SR20-14mm / Top Feed SR20 Install Kit
-
- Interchange Part Number:
- High Impedance / Hi-Z Injector / Saturated
-
- Warranty:
- Yes
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
These are High-Z injectors (High Impedance)
No resistor box will be needed. If you have resistor box, user should bypass (not use) it.
ID1000 SR20DET RWD. Top feed only.
With 14mm (Purple) adapter tops.
Denso cushion / 14mm lower O-rings.
Set of 4 injectors.
Product Code: 1000.13.06.60.14.4
This kit includes:
4x Injector Units
4x Fitment Adapters
4x Electrical Connectors
Electrical Pins & Insulators Set
- Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulse width range. The result is vastly superior cylinder to cylinder consistency, even at very low pulse widths.
- In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.
- With pressure capability in excess of 8 bar this injector has found a home in many different applications.
- The ID1000 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for engines. If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
