OEM BACK UP reverse CAMERA VIDEO adapter for TOYOTA SUBARU SCION Plug and play
- Item condition:
- New
- Ended:
- Oct 5, 22:26 PDT
- Price:
- $34.75 View item
- Shipping:
- FREE
- Item location:
- Morrisville,NC,USA
- Ships to:
- Worldwide
Item specifics
-
- Brand:
- AutoHarnessHouse.com
OEM Back-up Camera adapter harness for TOYOTA Prius/Camry/Corolla/Yaris and SCION FRS/tC/xB/xD and Subaru BRZ/WRX(with navigation)
***Installs with no wire splicing and no soldering. Everything just plugs in***
This harness is the simplest and cheapest way to install an aftermarket backup camera in your Scion, Toyota, or Subaru. Installation is simple and clean and does not require cutting wires. On most vehicles, it is not even necessary to splice into a wire. If your vehicle does not have the reverse trigger wire connected to the head unit(most already have this wire connected), it will be necessary to splice one end of this wire using the included pin and wire.
This harness uses a 6-volt relay to provide 12-volts to any standard backup camera.
What's included:
-1 backup camera adapter harness with Relay
-1 fused 12V power harness
-1 reverse trigger wire with splice connector(not needed in all cases)
-Splice connectors for connection of the reverse trigger wire and the backup camera power wire
This harness will only work on vehicles with the OEM touch screen head unit. If you are trying to connect an OEM backup camera to an aftermarket headunit, an adapter harness is available. Please contact us.
Installation:
It is strongly recommended that you test the camera and wiring prior to installing the camera in a permanent location.
-Verify that the vehicle is off.
-Carefully remove the plastic cover around the head unit and unscrew/unbolt as appropriate.
-Slide the unit out and Unplug the 16-pin connector and the 10-pin connector from the back of the OEM head unit.
-If not already done, Connect the 2-pin connectors on the AutoHarnessHouse.com adapter harnesses to connect them together.
-Plug in the 16-pin connector and 10-pin connectors from the adapter harness into the vehicle harness and into the back of the headunit(The 16-pin...
