cars near you

AMS Performance EJ25 Intake Manifold (Wrinkle Red)

---

Item condition:

New

Ended:

Jan 22, 09:43 PST

Shipping:

FREE

Item location:

Chesapeake,VA,USA

Ships to:

Worldwide

Item specifics

• Manufacturer Part Number:

  AMS.31.08.0001-1

• Brand:

  AMS

• Custom Bundle:

  No

• Material:

  Aluminum

• Fitment Type:

  Performance/Custom

• Modified Item:

  No

• California Prop 65 Warning:

  The following items are found to have compounds and chemicals known to the State of California to cause cancer, birth defects, and reproductive harm.

• UPC:

  Does not apply

---

AMS Performance EJ25 Intake Manifold (Wrinkle Red) FEATURES:

• 4.5-liter plenum volume
• 13" Equal length intake runners measured from the face of bellhorn to end of the runner
• 2.5" (63.5mm) intake runner diameter
• Bellhorn OD 3.8" (96.7mm)
• TGV housing replaced with long runner design
• Increased port size at cylinder heads allow matching to larger hand ported or CNC ported cylinder heads
• Throttle body opening accepts larger throttle bodies up to 2.625" (66,675mm) or 70mm with mild porting
• This version intake manifold is available with a standard orientation
• Bottom of the center plenum features 4-1/8" and 1-1/4" NPT spots for vacuum accessories

FITMENT NOTES:

• NOT BOLT ON, PLEASE READ ALL NOTES BELOW FOR NECESSARY MODIFICATIONS
• Some port matching of the manifold may be required when used in conjunction with CNC or hand ported cylinder heads
• Larger throttle bodies can be used with proper modifications (up to 70mm with minor porting, larger throttle bodies may also require adapter flanges)
• The intake manifold is flanged for STI drive by wire throttle bodies, other models (such as 08-14 WRX) require a change to the STI style throttle body
• Cable throttle bodies (02-05 WRX) can be used with custom fitting and flange adapter
• Standard configuration intercooler piping will need mild custom fabrication due to placement of throttle body
• Designed to use common Subaru AFTERMARKET top feed injector size (48mm overall length / 11mm inlet-standard Subaru rail size / 14mm outlet)
• Not compatible with OEM subaru injectors
• Not compatible with stock fuel rails or lines, requires aftermarket top feed rails and lines
• Not compatible with top mount intercoolers
• Not compatible with hard pipe stock location turbo inlets, requires silicone inlet
• Not directly compatible with mounting the factory upper coolant...

View more info...