cars near you

AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C

---

Item condition:

New

Ended:

Jan 17, 18:53 PST

Shipping:

FREE

Item location:

Chino,CA,USA

Ships to:

Worldwide

Item specifics

• Interchange Part Number:

  SD508,CO 9537C,9537,1521110,10301731,2789632

• Warranty:

  1 Year

• Manufacturer Part Number:

  E03OG19021

• Brand:

  LEDKINGDOMUS

• Fitment Type:

  Direct Replacement

• Placement on Vehicle:

  Front

• Clutch:

  w/ Clutch

• Pre-filled Oil:

  100ml

• Type:

  A/C Compressor

• Fitting:

  O Ring

• Material:

  Iron and Aluminum

• UPC:

  764283192196

---

A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C

Item Description:

NOTE: Each AC air compressor comes with 100ML of Oil. You dont need to add oil additionally.

Installation

Attention Please:

Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.

1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 

2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.

· Flush evaporators from inlet to outlet.

3. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.

4. Next, install the new or remanufactured A/C Compressor.

5. Install and tighten the A/C Compressor mounting bolts.

6. Reconnect any electrical connectors to the A/C Compressor.

7. Re-install the refrigerant lines and A/C belt to the A/C Compressor.

8. Reconnect the negative battery cable.

9. Evacuate the A/C system with an A/C servicing machine for at least one hour.

10. Check the system for leaks.

11. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.

12. Start the vehicle’s engine and turn on the A/C system.

Note:

To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

Please make sure the plug is...

View more info...